Leadshine AC Servo ELP-750Z Full Set
Servo 750W
₹29500.00
Out of stock
Leadshine ELP series AC servo products are high performance AC digital servo which is designed for position/velocity/torque high accurate control, power range up to 2kW and it can provide intelligent performance with easy tuning process.
Combined with abundant features like MFC, vibration suppression, Multi-mode filter function, etc.,. It provides machines a compact size, low tuning works. With high resolution up to 23-Bit,which can be used for high accuracy applications.
Easy tuning, flexible to control
Automatic identification for motor type
Pulse & direction
Notch filter, Damping filter
Dynamic brake
17-Bit/23-Bit absolute encoder
Internal resistor
Servo drive model: | ELP-750Z |
Rated output power: | 750W |
Rated output current(A): | 5.5 |
Max output current(A): | 16.5 |
Dimensions(mm): | 50*175*156 |
Main power: | 1-phase 190Vac – 240Vac , 50/60Hz |
Control mode: | IGBT SVPWM sinusoidal wave control |
Feedback mode: | 17bit single-turn incremental encoder/23bit multi-turn absolute encoder |
Input pulse: | 0-500kHZ,5V differential input |
Position band width: | 200HZ |
Electronic gear ratio: | 1~8388608/1~8388608 |
Analog input: | not available |
Velocity bandwidth: | 500HZ |
Input signal: | DI: 9 programable digital inputs, allows sink connection. Servo enable, over-travel inhibition, gain switching, command pulse inhibition, speed zero clamp, deviation counter clear, alarm clear |
Output signal: | DO: 6 programable digital outputs. Alarm output, servo-ready, at-speed, zero-detection, velocity coincidence |
Encoder signal output: | A phase, B phase, Z phase, long-distance drive mode output |
Alarm function: | Over-voltage, under-voltage, over-current, over-load, encoder error, position deviation error, brake alarm, limit alarm, over-speed error etc. |
Debug software: | All setting values of current loop, velocity loop , position loop can be modified and saved with Motion Studio software , all setting values can be downloaded and uploaded |
Communication interface: | USB for configuration |
Brake mode: | Built-in brake resistor or external resistor |
Adapt load inertia: | Less than 30 times motor inertia |
weight: | About 1.5-3Kg |
